Hrmm...was browsing through the 4.2 Harc product reference and noticed something...there is the following note: A HiPer ARC may only be set as the LAC. It can not be set as an LNS.... I'm curious...I went back into the 4.1 config guide and this language was not in there that I found. Has this functionality been removed in 4.2? I know it works in 4.1.59-6 'cause I'm using it on one of my Arcs. It would really suck if it was gone in 4.2. :) I did check my system that I have running 4.2 as a testbed, and the "enable l2tp lns" command is still there, and it *seems* to still enable the actual lns functionality (though I don't have an easy setup to test this out at the moment). What's up with this note in the 4.2 product reference? -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.