Hi, Got a question for you folks. On my USR Total Control, when I do a "show netconns" I get the following: Command> sh netconn Hnd Port Recv-Q Send-Q Local Address Foreign Address (state) 20 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 17 net 0 0 65.207.130.222.23 65.207.130.8.64477 ESTABLISHED 19 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 18 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 15 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 12 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 11 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 10 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 8 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 52 net 0 2 65.207.130.222.23 65.207.130.213.1186 ESTABLISHED 2 net 0 0 65.207.130.222.1069 65.207.130.8.53 UDP 3 net 0 0 65.207.130.222.1645 65.207.130.2.1813 UDP 16 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 9 net 0 0 65.207.130.222.23 65.207.130.58.3231 FIN WAIT 1 26 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 22 net 0 0 65.207.130.222.23 0.0.0.0.0 LISTEN 6 net 0 0 65.207.130.222.1633 0.0.0.0.0 LISTEN 7 net 0 0 65.207.130.222.434 0.0.0.0.0 UDP 5 net 0 0 65.207.130.222.1026 0.0.0.0.0 UDP 4 net 0 0 65.207.130.222.1723 0.0.0.0.0 LISTEN 0 S71 24 0 65.207.130.222.520 65.207.130.1.520 UDP This is after I cleared a bunch of hung telnet sessions. My questions are these: 1) Why is this NAS listening so many times on port 23? My other NAS'es (Cisco AS5200's and Portmasters) only show them listening once on port 23. 2) What is this last entry about? It shows one of our dial-up users who is currently connected on port S71 as the local address and the IP of our gateway router as the foreign address. We have several users connected right now to this NAS, so why is this one connection shown here? Thanks for the insight, Lisa Casey, Webmaster Netlink 2000, Inc. lisa@jellico.net