In using the total scrutinizer I have found that I have 1 Hiper Arc with DSP that works fine 1 Hiper Arc with Quads that gets error communicating with the Arc 1 NetServer with Quads that get the same error I have MRTG running and I checked out the community strings and they are correct. Is the any tips anyone might be able to give me... Ken At 11:42 AM 5/18/00 -0400, you wrote:
Hum. I had set another community string for security reasons, but putting "public" in there worked. *shrug* As long as it works. Interesting software. Might consider it! Thanks...
Are you sure that you've got a community string in the arc? Try the following command while logged into the Arc: add snmp community public access RO
That should add a community string of public to the Arc and see if it works correctly then.
Brian
********************************************************* Michelle M. Mogil Network and Computing Systems 735 Rhodes Hall, Cornell University, Ithaca, NY 14853 vox: (607) 255-0516, fax: (607) 255-8521 email: mmm3@cornell.edu **********************************************
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.