Hi
I found problems with derivation of Accounting to
backup server when Primary Server fail. In fact, when the primary server is
down, the acocunting is not sent to primary backup server (the ip, secret
key and port are correct)
Do you know the correct configuration for
Accounting in HiperArc?
The follows are the "RADIUS ACCOUNTING SETTINGS"
that I have
The Primary Server Status
is:
ENABLED
Primary Server
is:
192.168.0.202
Primary First Backup Server
is:
192.168.0.203
Primary Second Backup Server
is:
0.0.0.0
Primary Destination Port
is:
1646
Primary First Backup Destination Port:
1646
Primary Second Backup Destination Port:
1646
Primary
Preference:
1
Primary First Backup
Preference:
2
Primary Second Backup
Preference: 3
Max
Primary
Retransmissions:
1
The Secondary Server Status
is:
DISABLED
Secondary Server
is:
0.0.0.0
Secondary First Backup Server
is: 0.0.0.0
Secondary
Second Backup Server is:
0.0.0.0
Secondary Destination Port
is:
1646
Secondary First Backup Destination Port: 1646
Secondary
Second Backup Destination Port: 1646
Secondary Preference
:
1
Secondary First Backup
Preference: 2
Secondary
Second Backup Preference: 3
Max
Secondary
Retransmissions:
1
Source Port
is:
1646
Retransmission
Timeout:
15
seconds
Per Server Retry
Count
2
Accounting Start
Time:
CONNECTION
Log Unauthenticated
Calls:
ENABLED
Enhanced Tunneling Acct Status
:
DISABLED
Vendor Specific
Attribute:
ENABLED
Call Detail Record in Accounting STOP:
ENABLED
Active Accounting Server
(Primary):
192.168.0.202
Active Accounting Server (Secondary):
0.0.0.0
Attribute
Style:
STANDARD
VTP Tunnel
Flag:
BOTH
Prioritize First Server in a Server Group:
DISABLED
Accounting Counters
Syslogs:
DISABLED
Accounting Counters Syslog Frequency: TWELVE
HOURS
Accounting Counters Syslog
Reset:
DISABLED