Hi,
I've used Cisco AS5300's and PM3's longer than I have been using Total Controls, but acquired some some months ago in a merger.
I need to let the telco know how line provisioning is handled on our end. In my Cisco's and PM3's, I can find info like:
switch type primary-5ess framing esf linecode b8zs, etc
but can't find corresponding info in the two Total Control boxes that I have.
How do I find that?
Lisa: On the DSP card, click on the second LED down (this highlights all four carrier LEDs), go to "Configure-->Programmed Settings...-->Trunk Settings". -- ********************************************************* Michelle M. Mogil, Info Tech Engineer Systems and Operations, Cornell Information Technologies 735 Rhodes Hall, Cornell University, Ithaca, NY 14853 vox: (607) 255-0516, fax: (607) 255-8521 email: mmm3@cornell.edu **********************************************