Quoting Mark Ivens <mivens@clara.net>:
Thus spake ved@iyka.com (ved@iyka.com):
Well the error message says that one of the modem/modems dropped off the packet bus, and the hiper arc is trying to get that modem back but the modem is not responding. Typically this happens if either the modem reset (MFP - reason) and that the hiper arc did not recover. 4.2.32 - I am not sure but I think does not have all the fixes for the packet bus - 4.1.13 and 4.2.73 does - that code will fix this problem
The error message was generated for all the modems, leaving nothing left on the packet bus to take the traffic :-).
After struggling with the chassis for a couple of days, I'm afraid we went over to the Dark Side and put in a spare Cisco 5300. We simply ran out of time.
A complete reboot of the chassis - Power off and Power on should have resolved this issue atleast for 20 days - Anyway when you get the chassis back do use the latest code. V
When it gets shipped back to the UK, I'll do as you suggest and try a later code revision.
Thanks for your help, it was much appreciated.
-- ---------------------------------------------------------------------- Mark Ivens mivens@clara.net "You can teach a dog new tricks but Systems Administrator you can't teach Madonna to act." ClaraNET Ltd 020 7903 3203 - Wheel of Morality, "Anamaniacs" ---------------------------------------------------------------------
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.