I'm trying to convert from RIP to OSPF on a pair of HIPERARCs and so far OSPF is able to announce the addresses in the multi-aggregate address pools to the rest of the net. It's picking up routes from the other devices (a mix of Ciscos, Redbacks, Junipers, and Ascend MAX) as well as the default route from our border routers. However, when a PPP dialer receives their IP address via RADIUS instead of from the configured address pool, OSPF doesn't announce the address. The address is seen if one does a 'list ip network' and it's pingable. But none of the other devices on the LAN receive any announcement from the HIPERARC. I do have an OSPF sendpolicy that covers every possible address we might announce. If I revert back to RIP, the address learned from RADIUS is announced via RIP. Anybody have an idea on what I might be missing here? anunu2> show ospf global GLOBAL OSPF SETTINGS Router ID: 64.65.64.36 Administrative Status: ENABLED OSPF Version Number: 2 Area Border Router Status: DISABLED Autonomous System Border Router Status: DISABLED Type-of-service (TOS) Support: OFF External LSDB Limit: -1 Multicast Extensions Support: OFF Exit Overflow Interval: 0 Router's Support for OSPF Demand Routing: OFF OSPF Traps: ENABLED anunu2> list ospf host OSPF HOST TABLE HostIpAddr/Mask Metric AreaId 64.65.75.176/28 1 0.0.0.1 64.65.75.192/26 1 0.0.0.1 64.65.76.0/26 1 0.0.0.1 64.65.76.64/27 1 0.0.0.1 64.65.76.96/28 1 0.0.0.1 anunu2> list ospf send OSPF Send Policies: Source Address/Mask Action ANY 000.000.000.000/0 Do Not Advertise LOCAL 064.065.064.000/18 Advertise anunu2> list ospf int OSPF INTERFACE TABLE IfIpAddr/IfInd AreaId IfType AdminStat IfState Metric 64.65.64.36 0.0.0.1 BC ENABLED OtherDsgRtr 1 anunu2> show ip network backbone SHOW IP NETWORK backbone SETTINGS: Interface: eth:1 Network Address: 64.65.64.36/25 Frame Type: ETHERNET_II Status: ENABLED Reconfigure Needed: FALSE Mask: 255.255.255.128 Station: 64.65.64.36 Broadcast Algorithm: IETF Max Reassembly Size: 8192 WAN Type: N/A Remote IP Address: 0.0.0.0 IP Routing Protocols: OSPF IP Routing Metric: 1 RIP Interface Export Metric: 0 IP RIP Routing Policies: IP RIP Authentication Key: - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.