Also...saw this while I was logged in although there was someone else currently logged in at the same time: netserver>At 07:53:20, Facility "User Manager", Level "CRITICAL":: ACCT: Using b oth accounting ip addresses as primary with one or more set to 0 At 07:53:55, Facility "User Manager", Level "CRITICAL":: AUTH: No acknowledgemen t from RADIUS accounting servers, reached max number of timeouts Should problaby take care of your AAA setup. Also....seemed to look okay when do a show config but you do have your IP pools setup correctly don't you? If you can't figure it out give me a phone number to dial into and I should be able to tell you what the exact problem is. Todd ----- Original Message ----- From: Todd Bertolozzi To: usr-tc@mailman.xmission.com Sent: Friday, January 03, 2003 8:20 AM Subject: Re: [USR-TC] netserver 16 v.34 please help Never used a netserver before but one thing that doesn't look quite right is if you are telneted in and do a "list interfaces" the operator status for all your modems is down. Kind of surprised you even get connected. _auth test test works so your user is auth'ing. PAP is setup so that's not the issue. Do you have your modems mapped to ds0's? Todd ----- Original Message ----- From: shahrooz To: usr-tc@mailman.xmission.com Sent: Thursday, January 02, 2003 1:24 PM Subject: [USR-TC] netserver 16 v.34 please help Hi all, Happy new year I have got a brand new netserver 16 v.34. I set it up and all setting seems be correct. but when a dial up user using ppp connection connect to it disconnect immediately ..(after checking user name and password).(a slip connection doesn't have any problem) Can anyone help me and set it remotely? ip of netserver: 62.32.59.133 telnet user: !root password: sina SNMP string: public I also added a network user for testing device. user: test password: test thank you very much Shahrooz Sharghi