Boot the HiperArc. When the BOOT PROM Version statement comes up, it pauses before loading the kernel. Type AT{Z}. It MUST be all CAPS. Hit enter after typing it. The following message will appear: "Begin download now.". Begin your ZModem tranfer however your terminal program does it. I use SecureCRT, and it automatically pops up with the file selection window. I believe in Hyperterminal, you would go to Transfer and Send File. You would select the file and the way to send it (X-modem, Z-modem etc,) Select Zmodem. I hope this helps. Mark Mark Nicholas, markn@netdoor.com CCNA 601.969.1434 Internet Doorway, Inc. http://www.netdoor.com/
----- Original Message ----- From: "Steve Johnson" <linuxnut@sonic.net> To: <usr-tc@lists.xmission.com> Sent: Tuesday, December 11, 2001 3:25 PM Subject: [USR-TC] Has anyone flashed a Hiper Arc Via Console?
I tried to do this last night with no luck whats so ever. The documentation that came with the firmware explains how to flash via the consol, but it looks like the directions are for the DSPs. and not valid for the HiperArc. Does anyone have any Step-by-Step instructions on how to do this?
-Steve
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc