|-----Original Message----- |From: owner-usr-tc@lists.xmission.com |[mailto:owner-usr-tc@lists.xmission.com]On Behalf Of Kalev Nurklik |Sent: Wednesday, November 17, 1999 12:31 PM |To: usr-tc@lists.xmission.com |Subject: (usr-tc) different IP pools | | |Hi All! | |I'm trying to assign addresses from different pools to users in |different groups on one HARC. |I would prefer Radius to make the decision which user gets what |address so I found USR VSA reply attribute - |Framed-IP-Addr-Pool-Name. Getting no help from manual I |assumed that this is for telling Harc what pool to use. Great! |Attribute works to the point where I can see that the user who's |connected to HARC had a right pool name assigned (can't |remember exactly how I established that fact, probably with "show |session user" command) but the actual IP address from pool will |not be assigned to that user. |While I'm at it (finding out how to make this work) I hope You'll not |be angry if I fire a couple of questions to the honorary list? |Has anybody done this? Care to share step by step configuration |with me? | |Harc product reference tends to be quite superficial with ip pool |info other than setting them up. BTW, seems that this is not the |only issue about what that reference is superficial about. I have had |rough time getting useful info from there or for example at least |decent descriptions for cli commands - is there any point to offer |such half done document where feature/command descriptions are |missing? 3com - any comments? And I'm not using reference |material for old software - latest I could get from totalservice. |One other thing. It seem that I've "attached" some IP pools to |default user but I can't figure it out how I did it. I can see those |pools when I do the "show user default" but how to add them |or delete - beats me! |Found no help from Harc command reference... | The VSA attribute will work.. The matching pools on the HARC should be configured as "PRIVATE". To remove a pool from a user use the command "DELETE ADDRESS_POOL USER default POOL_NAME <XXX>" -M - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.