I'm configuring my
first routed subnet on the TCHub and can't quite figure out what I'm doing
wrong.
I have a Ascend P50
dialing in via ISDN with radius attributes of:
Framed-Address = 208.150.95.241
Framed-Route = 208.150.95.240/29 208.150.95.241 1
After connecting, I can ping the ether address of the
TCHub (208.133.28.51) from any of the subnet hosts can't ping anything past
it. I can't ping any host on the subnet from the TCHub. Below
is the output from the show ip network command.
HiPer>> show
ip network test-ip-I4586
SHOW IP
NETWORK test-ip-I4586
SETTINGS:
Interface:
slot:14/mod:2
Network
Address:
208.150.95.241/H
Frame
Type:
PPP
Status:
ENABLED
Reconfigure
Needed:
FALSE
Mask:
255.255.255.255
Station:
0.0.0.0
Broadcast
Algorithm:
IETF
Max Reassembly
Size:
3464
IP Routing
Protocol:
NONE
IP Routing
Metric:
1
RIP Interface Export
Metric:
0
IP RIP Routing Policies:
IP RIP Authentication
Key:
HiPer>>
I'm pulling my hair out trying to
figure out what I've done wrong. A kick in the right direction would be
greatly appreciated.
Thanks,
Robb
Bryn