Thus spake Charles Sprickman
Anyone care to elaborate on the differences you've seen between these two? I'm currently way back at 4.1.72.
Are some of the early Mac ppp problems fixed as of this version? I've decided to go ahead with DSP 2.0.51 in hopes that it fixes the most compatibility issues, but I'm torn between the ARC releases. I don't want something flakey, but 3Com does seem to be pushing it by sticking it in TCS 3.6 as the only arc code in that bundle.
Well, keep in mind that the TCS releases are somewhat amorphous. :) The same DSP code in 3.5 is also in 3.6. The only thing new in TCS 3.6 was the HiPer Arc code, so basically TCS 3.5 and TCS 3.6 are pretty much completely interoperable. I wouldn't worry about it too much. :)
I would very much like to deal with OSPF rather than RIP. What other fun things can I expect here?
I wouldn't use OSPF...its still pretty rough...if in doubt, head on over to usr-tc.1st.net (Thanks Ed! great to have the searchability again!) and look for Mike Andrews posts about his problems. Depending on how your network is layed out, it might not bite you, but I'm still staying away from OSPF until it and the routing code is cleaned up a bit. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.