Also sprach Lou Bernstein
I need a little help here. I have a TC with a HIPER ARC, several HIPER DSP cards, some Quad Digital cards and a Dual PRI-Card NAC. I have been running for a long time with the HIPER DSP cards without problems. I now need to run the Quad cards and can not seem to get the Dual PRI card to work(it did work at one time). The PRI line is coming from a Lucent Definity 3G switch and works fine with the Hiper DSP cards. When I connect the PRI line to the Dual PRI card all I get is a busy signal, the link does show that it is up and there are no alarms..
Probably need to check the configs on the quads to make sure they're set up to take calls from the PRI...like line source to pritdm, proly some others that I'm not thinking of off the top of my head...line source would be the first thing I'd check...and, of course, make sure that the interfaces are active and up on the Arc so that the quads can get the signal to answer the call, so they in turn can signal the dual-pri card. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.