The HARCs still reboot here spontaneously even with minimal telnet access and 'telnet client list' set to disabled. They do it less often but still do it.
Ugh...I've been struggling with the ARC on our testpool for months now. We were having problems with it choking up; I observed that the DSP would suddenly have all 23 channels 'local-out-of-service' and the only way to get it to take calls again was to 1] 'Restore' the channels, and 2] do a software reset on the ARC (why???). I upgraded it (the ARC) to 5.0.9 and began having major trouble with it rebooting itself almost daily. A 3Com technician managed to finally install 5.0.88 (engineering release) on it after a struggle and now it's back to its old trick of choking up and requiring a software reset. I'm very tempted to back off to the previous version--4.1.59--which has been running on the production pool with no problems. ********************************************************* Michelle M. Mogil Network and Computing Systems 735 Rhodes Hall, Cornell University, Ithaca, NY 14853 vox: (607) 255-0516, fax: (607) 255-8521 email: mmm3@cornell.edu ********************************************** - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.