On Wed, 6 Nov 2002, Lee Terrell wrote:
On a side note, in TCM I did highlight the span -> Configure -> Program Settings -> Trunk Settings and hit Load From, and loaded all the settings from the working DSP in the next slot, and the LPBK/D-ALM light still stays off.
Last ditch, make extra double sure that when you power the card up it is in fact using the software version you believe it is... In older revs the LED meant different things. Kind of a long shot, but who knows. C
Thanks again, Lee
Seth Jacobs wrote:
Sure,
We use NFAS. If you use NFAS, then
Using TCM, select the 4 LEDs. CONFIGURE/PROGRAM SETTINGS/NFAS Settings Set NFAS SPAN D-Channel TYPE to dchannelprimary.
If you don't use NFAS, then I don't know what the equivalent settings would be.
Seth
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc