Hi! After reboot DSP card 2.0.51 do not load config from nvram... Is that known bug or may be our hardware broken, or we need set country code, but where? ====== span1> set swt ? usage: set swtype Config_Option where Config_Option is one of the following: ictr4 - NET5/CTR-4 switch type ( European ISDN ) (E1) vn4 - VN4 switch type ( France ) (E1) ts014 - TS014 switch type ( Australia ) span1> set swt ic Configuration Request Successful. span1> cmd sv Save to NVRAM Request Successful. span1> reboot Confirm reboot (y/n): y Rebooting ... !!----------> SDL2 for the PPC403 <------------!! __ Enter Download Trigger __ Flash Image Has Valid CRC, Loading Image.... (Ch.255): 00:00:00:002 SCB CRC: ABCB6A96 exp. ABCB6A96 act. (Ch.255): 00:00:00:002 SCB Country Code Invalid Defaulting to International Console Password:
chdev span span1> dis swt Span1 Switch Type is: N/A
span1> ver Software Version 2.0.51 Regulatory Version 1.0 span1> span1> cmd rss Restore from NVRAM Request Successful. span1> dis swt Span1 Switch Type is: ICTR4 span1> ======= Good luck ! ====================== Andrey Zimin | AVZ7-RIPE MTU-Intel ISP Moscow, Russia ====================== - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.