I'm trying to set up fixed assignment modem routing on a TC1000 running TCS 4.2.73 with two HiPER DSP's running 2.1.9 attached to channelized T1's. I've used both the DSP console level command "set mdmrmeth fixeda" and the TCM method using Configure/Programmed Settings/Card Level/Parameter/Routing Method. A "display mdmrmeth" on each DSP in console mode shows FIXED ASSIGNMENT. Any suggestions? Am I missing something? HiPer>> list ip pool IP ADDRESS POOLS Name Address Size InUse State Route Unused Status tcpool 156.46.203.129/26 48 45 PUBLIC NO_AGGREGATE 0 ACTIVE HiPer>> list ip netwo CONFIGURED NETWORKS Name Prot Interface State Type Network Address hnet IP eth:1 ENA STAT 156.46.108.4/C IP-loopback IP loopback ENA AUTO 127.0.0.1/H ek-ip-I1513 IP slot:2/mod:1 ENA DYN 156.46.203.177/H deb-ip-I1536 IP slot:2/mod:24 ENA DYN 156.46.203.163/H jab-ip-I1278 IP slot:1/mod:22 ENA DYN 156.46.203.145/H jjw-ip-I1280 IP slot:1/mod:24 ENA DYN 156.46.203.129/H