Yup, if you have new enough code on all the cards, you can do something resembling the following on your ARC: arc> add network service dsp8cons server_type telnetd socket 8000 data "service_type=dialout,auth=off,interface=\"SLOT:8/CON:1\"" ...then telnet to port 8000 on your ARC and you'll be dumped directly to the console of the DSP in slot 8. You'll want to make sure you've got a console password set on your DSP's, of course. :) There is a way to set up a password on the ARC side, but I never got it to work right. I didn't try very hard though. Mike Andrews (MA12) * mandrews@dcr.net * http://www.bit0.com/ VP, sysadmin, & network guy, Digital Crescent Inc, Frankfort KY Internet services for Frankfort, Lawrenceburg, Owenton, Shelbyville "Don't sweat the petty things, and don't pet the sweaty things." On Thu, 13 Jan 2000, Terry Kennedy wrote:
I've heard this can doen rather using console cables to each DSP. Can someone point me to right docs to figure this out. I can't find it anywhere. Meanwhile back to the PDF files. Thanks
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.