When you call and get dead air does the Hiper DSP show a light on the front for any usage? If it does show a light, when this happened to me it was the Hiper DSP NAC that was bad. Thanks, Kris McElroy kmcelroy@duracom.net Internet Systems Engineer Duracom, INC. www.duracom.net "I'm retired 99.9%. Of course, there always is that .1%." --Michael Jordan, February 18, 1999 ----- Original Message ----- From: "Kevin Hemsley" <kev@ida.net> To: <usr-tc@mailman.xmission.com> Sent: Friday, January 24, 2003 1:34 PM Subject: Re: [USR-TC] HiperDSPs not talking to Telco
Have you confirmed whether or not the telco is sending you dnis/ani?
No, the telcon is not sending DNIS or ANI.
By the way....what do you get when you dial-in to the site? Busies/fast busies/dead air?
Dead Air - then after a long pause you get a recording "All circuits are busy" The CO tech said that because they are sending a sizure and are getting no answer back, they are dropping the call and going on to the next trunk.
Thanks, Kevin Hemsley kev@ida.net
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc