Hi, I am using Total Control 1000 with Dual PRI (E1) and Netserver PRI. There are a lot of connections problems with TC1000. 1.....People get "the computer you are dialing into is not responding" meesage very frequently. Win200 users get "there was no answer" message. is this the problem due to some faulty ports?. People get this error after handshaking with the modem. 2.......There are a lot of disconnection problems as well. And this problem is not with specific modem. The same person faces no problem on MAX TNT and PM3. But they keeps on disconnecting on TC1000. Are these problems inherent with TC1000 or am I missing something? Regards, Nauman. ----- Original Message ----- From: "Stephen Amadei" <amadei@dandy.net> To: <usr-tc@lists.xmission.com> Sent: Sunday, April 22, 2001 8:00 AM Subject: (usr-tc) TCView updated.
Hey guys. Just wanted to drop a quick line to let you know TCView has been updated to hopefully support the Quad DSP, er, Multispan DSP and the newer HiperARC. I don't have either animal yet, so I can't test directly.
Let me know if it works for you. http://www.dandy.net/~amadei/tcview-0.93r
Also, I'm will to support any card 3Com makes available to the TC... I just need a picture of the front of the card (preferable not from the TCM) and a Debug run of the current TCView.
Development of TCView has not stopped (only slowed due to lack of time), and I am still accepting any patches, improvements or suggestions.
----Steve Stephen Amadei Dandy.net CTO Atlantic City, NJ
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.