Assuming you are POSITIVE that you have the cable plugged into the console port of the arc and not the ethernet, and have the correct nic/nac combination... The only thing I can suggest trying is pulling both the front and back out, insert the back (nic) with the console plugged into it, and then insert the front (nac) card and see what happends. Other than that your card might be hosed. Todd ----- Original Message ----- From: "Shahrooz Sharghi" <shahrooz.sharghi@ispcomputers.com> To: <usr-tc@mailman.xmission.com> Sent: Saturday, March 12, 2005 4:31 AM Subject: [USR-TC] hiper arc consol
i have a correct consol cable, it works with NMC or Netserver card. but it doesn't work with hiperarc, card jumpers is set for 9600 and i try 9600,19200,57600,115200 but still doesn't work. what do you think about problem?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc