I don't have any T1/E1 line, all of them are analog i use Analog/Digital quad cards thankx ----- Original Message ----- From: Todd To: 'Discussion relating to the 3Com/US Robotics Total Controlmodemsystems.' Sent: Thursday, June 23, 2005 5:14 AM Subject: RE: [USR-TC] quad analog/digital modems Just a thought from using the quads way way back in the day..make sure you have the ds0's mapped properly from the dual t1/pri card to the quads. Can't remember off the top of my head all the commands necessary but you should be able to search for something like "mapping ds0's" and find what you need if that indeed is the issue. The mapping can be done via TCM. Todd -----Original Message----- From: usr-tc-bounces+berto=core.com@mailman.xmission.com [mailto:usr-tc-bounces+berto=core.com@mailman.xmission.com] On Behalf Of Shahrooz Sharghi Sent: Thursday, June 23, 2005 2:08 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: [USR-TC] quad analog/digital modems Hi all I have Some quad modems they don't answer the calls. I replace their NIC with another tested NICs also upgrade the modem software the latest version (6.1.86), still I have the same problem, how may I fix this problem? Thank you very much Shahrooz ------------------------------------------------------------------------------ _______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc