if you go to the span level on the dual t1 card pick the ds0 that has the modem in trbl command off-hook then on-hook this should fix trbl it's a bug with quads hardware reset on the quad card will also fix trbl -----Original Message----- From: David Hamilton <hamilt99@pilot.msu.edu> To: Usr-Tc@Lists.Xmission.Com <usr-tc@lists.xmission.com> Date: Wednesday, April 19, 2000 8:01 PM Subject: (usr-tc) modem not available
I have a chassis with 1 PRI card 12 quads and 1 nmc. When I do a "Performance-->Session monitor-->DSO Stats :DSO Timeslot Staus, Modem Connected to DS0" on the span for the first t1 I get:
SlotChannel.Subchan DS0 Timeslot Status Modem Connected to DSO 01001.01 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.02 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2) 01001.03 Specified DS0 is idle(2) Corresponding modem is unavailable(2)
Does anyone know how to make these "modems available"?
David Hamilton Network Engineer Voyager.Net david.hamilton@voyager.net Phone:517-324-5884
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.