After setting set modem s49 active, do a hardware reset to modem card from TCM. ----- Original Message ----- From: "Craig" <Craig@tavrida.net> To: "Aaron Daniels" <usr-tc@lists.xmission.com> Sent: Friday, June 29, 2001 11:06 AM Subject: Re: (usr-tc) Quad Analog Modem Problems
Hello Aaron,
Sunday, April 29, 2001, 7:12:02 PM, you wrote:
Did you ever find a soulution to this problem if so what was it??? AD> Hi, AD> I am having problems with some Quad Analog modem cards that I have installed, AD> I cannot get them to stay active I do set modem s49 active and it all appears to work, then I save AD> and reset then I get whats below. AD> the modems report A/I/P then after a reset they go A/A/P but I cant get them A/R/P.
AD> Basically the modem is not active because it cannot successfully negociate with the packet bus(I AD> think). AD> after a reset my syslog reports: AD> Apr 28 14:05:19 dialup9.dataheart.net S49 packet bus handle opened. Handle = 26.
AD> After this the netserver reports the modem as active all though there is still no HDLC Framing and AD> the interface is still set to Unassigned instead of ptp49 as it usually is. AD> then 30 seconds later: AD> Apr 28 14:05:49 dialup9.dataheart.net S49 packet bus failed to connect! stat=-1 AD> Apr 28 14:05:49 dialup9.dataheart.net S49 packet bus handle closed.
AD> now the netserver reports it as inactive again.
AD> I have Quad Digital/Analog cards working fine in the same chassis but these Quad Analogs are just AD> not co-operating.
AD> any help would be appreciated, AD> the 3com knowledgebase has not helped me. AD> Thanks, AD> Aaron Daniels
AD> - AD> To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" AD> with "unsubscribe usr-tc" in the body of the message. AD> For information on digests or retrieving files and old messages send AD> "help" to the same address. Do not use quotes in your message.
-- Thanks, Craig Craig@tavrida.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.