Hello, We are having problems with a fast busy situation on a Total Control using Hiper DSP cards using 2.0.81 on the first three Hiper DSP's and 2.0.51 on the last two (this was to test the new code) and a Hiper ARC card using 4.1.59-6. We use PRI lines 23 B's and 1 D per PRI line in Ameritech area who uses a 5ess switch. We had four Hiper DSP cards and added a fifth one Friday, since then we have had a problem where the TC can only take 92 connections instead of 115, once 92 modems are filled up anyone calling in gets a fast busy signal, the 92 connections can even span across all five Hiper DSP cards but once it gets to 92 a fast busy. We have checked all the Hiper ARC settings against another Total Control chassis we have with more cards and all the settings look right, we have rebooted the Hiper ARC and the Hiper DSP's but this has not helped. Ameritech has checked and all the B channels and D channels are up and provisioned properly. We can't help thinking that we have missed something, any help or ideas would be greatly appreciated. Thank you, Clint R. Sparks ComQuest Internet Services csparks@cqc.com - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.