The default for the hardware is usually 9600bps, 8-n-1. If that doesn't work, you can check jumpers on the card you are trying to connect to, but most-likely the cable made is not correct.

-----Original Message-----
From: Ahsan Shariful [mailto:ahsansimon@yahoo.com]
Sent: Monday, February 24, 2003 2:42 AM
To: usr-tc@mailman.xmission.com
Subject: [USR-TC] can't connect to cosole for usr-tc 1000

Hi,

I need to setup a usr-tc. Hyperterminal can't connect to usr-tc 1000. I'm using a custom cable RJ45 - DB9 ( i got the pinout from this mailing list). I tried with all bits/second (110 to 115200) and other setting as "8-None-1-Hardware". I can't figure out the problem. I don't have the null moded cables or any other cable provied with this hardware.

Somebody please help :-)

Ahsan

Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, and more