Also sprach Brad Gass
Although I'm getting most of the kinks worked out of my USR gear, I'm now working on the second chassis, which has a dual PRI card installed.
The other chassis in this POP had a dual T1 card installed, and seems to be working just fine. However, I can't seem to see how/where to configure the dual PRI to function in channelized T1 mode. Unfortunately, I don't have access to PRI's with this telco.
So, by that I assume that you want to use it as a pure channelized T1, not as a PRI...
Reading the archives, I surmise this is possible to do, but may require a minimum firmware level.
Actually, it requires a different firmware on the dual-pri card, not just a certain level. Force a flash of a channelized T1 version of the firmware to the card and you'll be all set. The dual-pri code won't do plain channelized T1 at all, the card is perfectly capable of it, but the firmware needs to be swapped out with dual-t1 code to do it. -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.