You do know about the cut-and-paste feature right? Change the value, "ctrl-c", click to the left of where you entered the value - on the part that says "Carrier loss detect delay", "ctrl-v", Click set/ok. That should change it across all the DSP's on that chassis. Just making sure. blake
-----Original Message----- From: Tom Swenson [mailto:tom@netconx.net] Sent: Wednesday, April 19, 2000 3:12 PM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) Suggested Firmware
It didn't appear to be, but I never really have known. As I'm going thru my dsp's and changing settings, it appears after I hit set, then if I hit get, the new value comes back. Thanks for responding.
Tom Swenson NetConX - Internet Access - Web Design - Client Managed Web Database Applications tom@netconx.net http://www.netconx.net (515) 421-4170 - Voice (515) 423-3351 - FAX
*********** REPLY SEPARATOR ***********
On 4/19/2000 at 3:07 PM Blake Fithen wrote:
I don't think rebooting is necessary.
blake
-----Original Message----- From: Tom Swenson [mailto:tom@netconx.net] Sent: Wednesday, April 19, 2000 2:59 PM To: usr-tc@lists.xmission.com Subject: RE: (usr-tc) Suggested Firmware
Do I need to reset my DSP after changing this? I'm still fairly new to USR's. I found the setting, mine was at 7 by default. I don't always know what changes are instantaneous and which ones need rebooting for.
Tom Swenson NetConX - Internet Access - Web Design - Client Managed Web Database Applications tom@netconx.net http://www.netconx.net (515) 421-4170 - Voice (515) 423-3351 - FAX
*********** REPLY SEPARATOR ***********
On 4/17/2000 at 2:58 PM Blake Fithen wrote:
Don't forget to set the "Carrier Loss Detect Delay" to around 20 or so. That helped us quite a bit on the disconnects/failed handshakes.
blake
-----Original Message----- From: Mark S - Squid Manager [mailto:squid@greenapple.com] Sent: Monday, April 17, 2000 2:37 PM To: usr-tc@lists.xmission.com Subject: Re: (usr-tc) Suggested Firmware
It works, but we have noticed higher disconnects and failed handshakes with these two.......2.0.51 and 0.53 and above works great........
Mark
----- Original Message ----- From: "K Mitchell" <mitch@keyconn.net> To: <usr-tc@lists.xmission.com> Sent: Monday, April 17, 2000 1:52 PM Subject: Re: (usr-tc) Suggested Firmware
At 01:36 PM 4/17/00 -0400, Mike Andrews wrote: >No, you should be running 2.0.51 on the DSP's for that...
How does 2.0.51 work with 0.49 hardware?
-- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.