Blame the CO or either the ARC - telnet to the ARC next time it happens and see what the interfaces are set to - I would run some other ARC code (4.2.32 or 5.1.99-8) as well. Marshall Morgan Internet Doorway, Inc (aka NETDOOR) http://www.netdoor.com 601.969.1434 x28 | 800.952.1570 x28 | 601.969.3629 x28 | Fax 601.969.3838 ----- Original Message ----- From: "Steve Johnson" <linuxnut@sonic.net> To: <usr-tc@lists.xmission.com> Sent: Monday, February 04, 2002 12:02 PM Subject: [USR-TC] UST TC1000 and 'Level 3 alarm'
This morning one of my pops running TC1000 with HyperArc V5.09 NMC V7.1.8 and DSP V2.1.85 started returning all circuits are busy errors. I called the CO and they told me 3 of my PRIs are returning a 'Level 3 failure alarm' After reseting the cards and waiting for the 5E switch on their end to see that I did that (took about 3 minutes) the cards came back, the alarm was gone and the all circuits are busy error went away. Now I know I wasn't full up to capacity because this is a new pop with 299 lines, and there are only about 16 people testing it for me right now.
My question is, anyone know what causes this?
Thanks
-Steve
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc