What is the significance of the two DNIS? ----- Original Message ----- From: "Stephen Rivera" <steverivera@wrca.net> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, July 24, 2002 6:37 PM Subject: RE: [USR-TC] ISDN-DOV
here's what i learned fro you guys today :) Charles is correct and there must ne 2 DNIS numbers privisioned from the telco.
configure- program settings- DNIS ACCESS CODES ADD CALL TYPE SET CALL 1 (dnis #)DIGIITAL (NUMBER MUST BE DEFINED EXACTLY AS TELCO PROVIDED) SET CALL 2 (DNIS #) NONE (# MUST BE EXACT)
BE SURE THAT THE DIAL IN DEVICE(S) ARE SET FOR THE DOV AT COMMAND ATS69=32 (COURIER I-MODEM)
i SET IT UP IN THE LAB LIKE THIS TODAY AND IT WORKED FINE
GOOD LUCK
-----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com]On Behalf Of Charles Sprickman Sent: Wednesday, July 24, 2002 1:00 AM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] ISDN-DOV
Hi,
I was only able to get this working by having the telco set up an additional number in our hunts. After that, you have to config the DSP to act on the dialed digit and force it as a digital call. It works well, but it's much easier on other equipment. And yes, the docs are very vague, and no paid support from 3Com will not yield the answer you seek :)
If you don't find it, I can dig up the exact location of the setting on the dsp (need to boot to windows).
Charles
-- Charles Sprickman spork@inch.com
On Tue, 23 Jul 2002 tdewitt@megalink.net wrote:
Sorry...should have specified my hardware. We're using a mix of HiperDSP/HiperARC and the new Multispan/ARC
On Wed, 24 Jul 2002 07:19:05 +1000 "Richard Ham \(Mailing Lists\)" <richard@cust.caloundra.net> wrote:
Does anyone know if the TC needs any changes in config to answer DOV calls? All our trunks are PRI and we have no issues answering pure ISDN calls. I'm just curious if we need to make any config changes for a customer placing a DOVcall?
Todd,
From my investigation and testing, you have to create a modem pool with an indial number to tell the tc to answer the call as a data call regardless of bearer capacity. Your netserver pri also seems to need the daughter card.
The documentation for quads is completely useless in this regard, and since thats all I have, I never did get this operational. Maybe Thomas Goodman would help us out :)
I've searched high and low for more than a single paragraph of info.....
Regards,
Richard
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com
http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Todd
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc