Hi, Looking for someone with good knowledge of Netserver-era TC stuff... I have an old 45A chassis with an NMC, Netserver PRI, and 6 "Quad Analog" cards (hw rev. 0.2.0 and 2.0.0) with analog NICs. These modems all show up as "AIP" on the Netserver. If I stick in a newer Quad Digital card in the chassis, it comes up fine as "ARP", but it's kind of useless, since it can't talk to an analog NIC. I don't go back that far, the oldest card I ever saw was a Quad Analog/Digital. Is there a chance that these analog cards were not made to work with the Netserver? I can talk to them on the DTE ports on the analog nics, so they work, but I don't see a way to tell them NOT to talk to the DTE ports but to use the packet bus. Someone also mentioned that they may talk to a Netserver, but NOT a Netserver PRI. Any truth in that? I just don't know about stuff that old, and any docs for this stuff are long gone from the Commworks site it seems. Thanks, Charles -- Charles Sprickman spork@inch.com