-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 you must disable and delete the network in order to create a new network with the appropiated netmask with the following commands: disable ip network <net> delete ip network <net> and then: add ip netWORK <net> FRAME ethERNET_II INTERFACE eth:1 enaBLED YES addRESS x.x.x.x/y where: <net> is the network name. x.x.x.x is an ip address for interface eth:1 y is the mask specifier, it can be a numeric value from 8 to 32. regards, Jorge Lozano <jorge@andinet.com> NA and ISSO Andinet On Line <http://www.andinet.com> The only way to predict the future is... to create it! - -----Mensaje original----- De: owner-usr-tc@lists.xmission.com [mailto:owner-usr-tc@lists.xmission.com]En nombre de John Mies Enviado el: Viernes, 26 de Enero de 2001 01:27 p.m. Para: usr-tc@lists.xmission.com Asunto: (usr-tc) Changing the mask through CLI What is the command for changing the IP Net mask through the CLI? John Mies Illinet.com http://www.illinet.com - - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.8 for non-commercial use <http://www.pgp.com> iQA/AwUBOnHMk6p3oywyFVUlEQJbzACg6YfuiAyZ0e3qRZLTaZyn5A1S1zYAoKz8 b0OBAfFxztqhp+UcdJZClqMZ =LmSn -----END PGP SIGNATURE----- - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.