---- Original Message ----- From: "D. W. Piper" <dwplists@loop.com> To: <usr-tc@lists.xmission.com> Sent: Monday, June 05, 2000 4:01 PM Subject: (usr-tc) Deciphering entries in radius log
Hi all,
I've tried searching the 3Com support site and etc. several times over the last several days about this, but if the answer's there I'm managing to miss it completely:
For some time we have been having entries such as the following appearing in our radius log:
"S12 didn't get online! status=-1, connect_fail=79, link_fail=31"
This means the modem did not get connected and the user was dropped. I do not remember what reason 79 means but there is a document on totalservice, you have to search 3kb for connect-fail reason - this will give you a list for all this values from 1 - 91. and every new reason is added. The link fail 31 - means that the netserver disconnected to the call for the modem did not connect. V
...where the "connect_fail=" value varies but the "status=-1" and "link_fail=31" values are always the same.
For example, between 04:00 and 13:00 today there were 69 such entries, all from our USR equipment, with the value and count for "connect_fail=XX" as follows:
connect_fail=3 -- 1 entry connect_fail=13 -- 28 entries connect_fail=21 -- 2 entries connect_fail=36 -- 16 entries connect_fail=79 -- 19 entries connect_fail=80 -- 3 entries
I'd thought these were from the set of "Failure-to-Connect-Reason" values in the Vendor Specific Attributes, but that doesn't seem to be it since there are no Failure-to-Connect-Reason values for 79 and 80.
Can anyone help me decipher this, please?
TIA,
- David
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.