I believe you need to disable the pools / make sure no 1 is on them before you can change them.... If all else fails delete them and set them up again with the route_aggregate command Todd ----- Original Message ----- From: "Lewis Bergman" <lbergman@wtxs.net> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Friday, October 22, 2004 2:38 PM Subject: Re: [USR-TC] Send ICMP Host Unreachable for Pool: DISABLED
Any ideas on why it won't let me set the ip pools to aggregate?
HiPer>> set ip pooL 1 rOUTE aggREGATE CLI - Request SET IP POOL failed on field ROUTE CLI - Request failed with error: BAD_VALUE on value: 1
-- Lewis Bergman Texas Communications 4309 Maple St. Abilene, TX 79602-8044 325-691-3301 800-299-6962
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc