Bryan, Check to be sure your trunk settings are correct or the same as your other DSP cards. Dave Lajoie RA Administrator E-Mail: dave@ncia.net On Fri, 11 Feb 2000, The NOC (COX Internet) wrote:
Heres what I just found: When I do a show chassis slot 6 (which is the slot having problems), I get the settings: Number of Ports: 23 and DYNAMIC Console: Yes. When I do any of the other slots I get Number of Ports: 24 and DYNAMIC Console: NO. I hope this piece of information helps. I am lost as to why its doing this.
Bryan
-- Original Message --
Ok. I just upgraded the DSP code from 1.0.8 to 2.0.51 and I now have 2 red lights on my DSP card. The 2 red lights are ALM and LPBK/D-ALM. Is there a problem with that version of code or did I over look something during the upgrade. The ARC card version is 4.2.32-1 and the NMC card is 5.5.5. I did the upgrade and then rebooted the card and after the reboot it came up with the 2 alarms. Since then I have had somebody pull out the card twice and put it back in. Any suggestions?
Bryan NOC Technician COX Internet
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.