There may be another way, but I've always had to delete both pools then add the bigger pool. The pools will still show up until the last user with an IP in that pool disconnects. If you delete both pools before you add the new pool then there will be a time period that no users can connect. I am not sure if after deleting the initial pools you are allowed to immediately add in an overlapping pool. I would think not since that could allow for duplicate IP's. My suggestion is to leave it like it is. I have found that when switching cards for troubleshooting or expansion it is much easier to have pool sizes that match the number of modems on a card. When I pull or add a card I just switch the IP pool along with the card. If you have a large pool and for some reason have to delete it for hardware or IP management you could end up with less IP's than modems. -----Original Message----- From: usr-tc-admin@mailman.xmission.com [mailto:usr-tc-admin@mailman.xmission.com] On Behalf Of Support Sent: Tuesday, March 11, 2003 4:04 PM To: usr-tc@mailman.xmission.com Subject: [USR-TC] Re: IP Pool Size Actually, I wasn't clear. We did an ADD IP POOL "IPPOOL"...., but it complains that our name is duplicated. We then did and ADD IP POOL "IPPOOL2"... for 24 ports, and that worked, but that's two 24 IP pools with separate names. I'd like to remove one of them and modify one to be a single, 48 IP pool. Thanks again. :-) Todd Chamberlain ----- Original Message ----- From: "Support" <support@inet2000.com> To: < > Sent: Tuesday, March 11, 2003 3:54 PM Subject: IP Pool Size
Hi. We just added a second Channelize T1 and it's not taking calls. Specifically, it's answering, but not authenticating. When I console into the HiperARC, I see an alert that the ''facility IP level critical, not IP address available for IP assignment''
I know we did this when we setup the Chassis last year, but.... So, urgently, how does one go about increasing the size of our IP pool from 24 to 48 IP's?
I only have console access, since my Arc software doesn't take to my HiperARC (To new...)
Thank you, Todd Chamberlain
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc