Looks okay... TC2-Arc16>> list chassis Slot Owner Description Ports Type Console 1 YES 24 Channel High Density Modem 24 STATIC NO 2 YES 24 Channel High Density Modem 24 STATIC NO 3 YES 24 Channel High Density Modem 24 STATIC NO 4 YES 24 Channel High Density Modem 24 STATIC NO 5 YES 24 Channel High Density Modem 24 STATIC NO 6 YES 24 Channel High Density Modem 24 STATIC NO 7 YES 24 Channel High Density Modem 24 STATIC NO 8 YES 24 Channel High Density Modem 24 STATIC NO 9 NO 24 Channel High Density Modem 24 STATIC NO 10 NO 24 Channel High Density Modem 24 STATIC NO 11 NO 24 Channel High Density Modem 24 STATIC NO 12 NO 24 Channel High Density Modem 24 STATIC NO 13 NO 24 Channel High Density Modem 24 STATIC NO 14 NO 24 Channel High Density Modem 24 STATIC NO 15 NO 24 Channel High Density Modem 24 STATIC NO 16 NO 24 Channel High Density Modem 24 STATIC NO
On 31 Jan 2005 at 8:55, Lewis Bergman wrote: When you do a list chassis does the arc show that it owns the slot in question and display the correct modem type?
GiGoNET Support wrote:
Hey Joel,
I've just about got this working.. I think I've missed a piece. There are no alarms. I call the calls come in... but a modem on the dsp doesn't seem to get mapped to the call.
*Slot1 DSP/span1> display atstat*
Tslot Status Modem Status Call ID Action Span Connect Srvc State Queued Status 01 Idle N/A IS 0x00000000 NONE Ok 02 Idle N/A IS 0x00000000 NONE Ok 03 Dial In 003 IS 0x00020002 NONE Ok 04 Idle N/A IS 0x00000000 NONE Ok 05 Idle N/A IS 0x00000000 NONE Ok 06 Idle N/A IS 0x00000000 NONE Ok 07 Idle N/A IS 0x00000000 NONE Ok 08 Idle N/A IS 0x00000000 NONE Ok
*Slot1 DSP/span1> display atconfig*
Tslot Block Assigned Service ID Description Call Type Chan State 01 NONE 01 IS 02 NONE 02 IS
Cheers, -Tom