Thus spake Terry Kennedy
What's the lastest on this code? Is it nessasary for anything other than the new features such as ospf?
OSPF is still a bit rough...I wouldn't recommend anyone really betting their life on it yet. :) Maybe in the next release...not really sure if there are any improvements in the works for the next release on OSPF yet.
Also, it took 3 times trying to load it through tcm before it actually was there. Very strange, no errors - the download windows just went away and the wasn't there on the reboot.
Sounds like a problem with TCM or windows actually. Another possibility (and this works much faster) is to use the tftp client or server capability of the Arc directly to get the code to the Arc. tftp the dmf file directly to the arc (the arc can function as either a tftp server or client...choose whichever is more convenient for you :), and make the filename (either upload as, or rename after its uploaded) netserve.dmf. When you reboot the Arc, it should see this file and extract it for the new code and install it during boot.
Are the hidden commands still there with release? If so, anyone rember how to enable them. I can't for the life remember.
They are always enabled...you can always use the commands... "_show com" to diplay them when you use "?" -- Jeff McAdams Email: jeffm@iglou.com Head Network Administrator Voice: (502) 966-3848 IgLou Internet Services (800) 436-4456 - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.