Marius Strom wrote:
I'm trying to hook up a Pipe 75 with a Static IP and NAT enabled to a HiPerARC chassis.. When I disable the NAT on the Pipe, it connects, when I enable it, it won't connect.. The pipe has been dialing into a Livingston PM2e up until now, and when I modify the remote address and the phone number to have it dial to our TC equipment, it won't do it. I've gone and disabled things such as STAC and all other compressions.. I did set the Pipe to MP with BACP=Yes.
Please let me know if you guys have had any success, and if you've got success, let me know how I can have it too *chuckle*
Do you have the LAN Adrs, WAN Alias, or IF Adrs defined? I left those blank and assign the static IP from radius. Otherwise you have to set reported IP on the TC to correspond with the LAN Adrs. You should be able to just define the WAN Alias but I couldn't even get that to work between two ascends. What is mon ppp outputting? - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.