I remember hearing about the number of DSP's to ARC limit, but I didn't think that would be causing the D channel on my 7th DSP to be going up and down continuously. I have another ARC card on hand, so I'll try to add that one and see what happens. Thanks for the tip. "The NOC (COX Internet)" wrote:
Jason,
I have read somewhere that after so many cards (7 or 8), you need to add another gateway card. After so many DSP cards, the load gets overwhelming for only one gateway card so you have to add another. This might be the situation in your case.
Bryan NOC Technician COX Internet
----- Original Message ----- From: "Jason P." <jjperc@petronet.net> To: <usr-tc@lists.xmission.com> Sent: Wednesday, January 19, 2000 10:10 AM Subject: (usr-tc) D Channel Problem
I just installed our seventh Hiper DSP card into our chassis and the Loopback/D-Alarm LED on this card keeps alternating between green and red about every 30 seconds. I have this card set up exactly like the other cards in this chassis and the telco (supposedly) has this span setup the same way as all of our others. Does anyone have any insight into what could be going on?
Here are my specs:
T1 PRI Hiper DSP 2.0.81 Hiper ARC 4.1.59-6 Hiper NMC 6.1.17
Thanks in advance.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.