I believe if you do a software reset on the DSP you will drop your customers. Also.....do you use a radius server for authenticating your customers? I would recommend setting the timeouts via customers radius profile. We have radius setup to default all new entries to specific timeout values. This way you don't have to confirm that all of your nas's are setup properly. Have them use your radius server and make sure that's setup properly. Todd ----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa@tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc@mailman.xmission.com> Sent: Thursday, February 03, 2005 11:21 AM Subject: RE: [USR-TC] 3COM settings
Todd:
Let me clarify. I want to change the 'timeout' settings. Under TCM, I select (all) the HiPer DSP cards and the under 'Call Control Options' I change the 'Inactivity Time[min]S19] from 10 min to 6 min & issue the 'Set' & save the settings as:
Action/commands: software-> save Template T1 to NVRAM Action/commands: software-> save Template T1 to NVRAM Action/commands: software-> software reset
Can I do the above without disconnecting current users who are connected to 3COM?
Kirti
-----Original Message----- From: Todd Bertolozzi [mailto:berto@core.com] Sent: Thursday, February 03, 2005 10:41 AM To: Discussion relating to the 3Com/US Robotics Total Control modemsystems. Subject: Re: [USR-TC] 3COM settings
It all really depends on what settings you want to change. I don't believe it really matters if you are configuring the arc, something via TCM, or via console. What do you want to configure/change?
Todd
----- Original Message ----- From: "Kirti S. Bajwa" <kbajwa@tib.com> To: "'Discussion relating to the 3Com/US Robotics Total Control modemsystems.'" <usr-tc@mailman.xmission.com> Sent: Thursday, February 03, 2005 10:33 AM Subject: [USR-TC] 3COM settings
Hello:
Our 3COM chassis is up and initial tests shows that it is working. Since there are users logged on to the chassis, how should I make changes to the settings? Is it possible to make changes via TCM & no user is disconnected?
Kirti
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc