At 10:24 AM 2/27/01 +1000, Steve Monkhouse wrote:
Framed-IP-Address = 192.192.192.xxx, # customer's static IP address above Framed-Netmask = 255.255.255.255, Framed-Route = "193.193.193.0/24 192.192.192.xxx 1", # network to be routed, netmask, static IP of customer, metric I'm using 3Com S&A Server. In the routing entry, it asks for "Framed Route" in the form of "destination gateway metric", with no field requesting a netmask. Would the netmask be part of the destination entry? Thus, where 155.155.155.201 is the static assigned IP and 99.99.99.32/27 is the assigned subnet; Framed-IP-Address = 155.155.155.201 Framed-Route = 99.99.99.32 255.255.255.224 155.155.155.201 1 Would this be correct? Also, will this handle all the routing, or do I also need something like ip route 99.99.99.32 255.255.255.224 155.155.155.201 in my Cisco gateway router as well? Thanks, -- Kirk Mitchell-General Manager mitch@keyconn.net Keystone Connect Unlock Your World Altoona, PA 814-941-5000 http://www.keyconn.net - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.