It is not supposed to happen, but sometimes the X2 key can be lost (usually when the NMC is replaced). Please call us at Tech Support and we can help. If you have your proof of purchase it will speed the process, but we should be able to help you get your key back. Please call us at (800) 231-8770. Hope this helps. Todd ;-} "Steve Valiunas" <Steve_Valiunas@mw.3com.com> on 12/07/99 09:41:59 AM Please respond to usr-tc@lists.xmission.com Sent by: "Steve Valiunas" <Steve_Valiunas@mw.3com.com> To: usr-tc@lists.xmission.com cc: (Todd Keister/MW/US/3Com) Subject: Re: (usr-tc) X2 Key still necessary Flashing new code to an NMC will not remove previously installed feature enable keys. Code for the various cards is tested and released in matched 'systems releases', the latest being TCS3.5. I know of no reason why you should not run the code from this release. Someone else with more operational experience might be able to tell you specific quirks that they may have found. You may find some unusual behavior if you mix codes from different releases within the same chassis. The Software Compatibility Matrix is posted on http://totalservice.3com.com and documents what codes are included in each release. TCS3.5 includes NMC 6.0.9/6.1.17/6.2.17, and Quad 6.0.6/6.1.6. Steve V Steve Rivera <sales@wrca.net> on 12/07/99 08:50:04 AM Please respond to usr-tc@lists.xmission.com Sent by: Steve Rivera <sales@wrca.net> To: usr-tc@lists.xmission.com cc: (Steve Valiunas/MW/US/3Com) Subject: Re: (usr-tc) X2 Key still necessary Is it possible to lose that enable key in the flashing process? If I am installing a v90 NMC to a chassis that had not been running v90 standard, Is the card all I need to install. Some people have mentioned that you have to match the code on the modems. Is that true? Can anyone suggest a stable, v90 compatible sequence for the modems (Quad Digitals) and the NMC v90? At 07:34 AM 12/07/1999 -0600, you wrote:
You need only add the X2 key to a chassis once. Any quad modem code upgrdes after that will then use the same key.
Steve
Ralph Helfenberger <r.helfenberger@comlight.ch> on 12/07/99 04:38:45 AM
Please respond to usr-tc@lists.xmission.com
Sent by: Ralph Helfenberger <r.helfenberger@comlight.ch>
To: TotalControl Mailing List <usr-tc@lists.xmission.com> cc: (Steve Valiunas/MW/US/3Com) Subject: (usr-tc) X2 Key still necessary
Hi everybody I would like to upgrade a Netserver/Quadmodem based Chasis to V.90. When I did this last year I had to buy a X2 enable key. This product is no longer available. So the question I have: Is this key still necessary? Or do I just upgrade the Quadmodems to the latest code and then I have V.90 automatically enabled?
Ralph
-- ========================================================================== R. Helfenberger Internet r.helfenberger@comlight.ch Comlight AG Tel +41 31 740 40 40 Industriestr. 17 Fax +41 31 740 40 90 3178 Boesingen Switzerland www.comlight.ch ==========================================================================
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message. - To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.