I think its telco (and want it to be telco :P). DSP cant receive called number (DSP's number, not users). Strange is that for some callers called number is sent. (I tried to dial and once DSP didn't receive his num. and then it received). Ok, Thanks all for help. Tommorow I'll consultate with telco and if nothing helps I'll reboot whole chassis. Todd Bertolozzi wrote:
I certain unreliable huntgroups I've had to reboot the whole group to get rid of busies. Can't remember if it was related to a config setting or something on the telco side. In particular I remember problems like this when dealing with NFAS.
Todd
-----Original Message----- From: usr-tc-bounces@mailman.xmission.com [mailto:usr-tc-bounces@mailman.xmission.com]On Behalf Of alex@wanex.ge Sent: Monday, April 14, 2003 11:20 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] fast busies
But this problem is on each DSP cards. Is it possible? Reboot all cards?
VCI Help Desk wrote:
We have had that problem before and I was able to pinpoint a certain
DSP
card. After resetting the card it went away.
We've also seen that problem when the telco was experiencing high call volumes and was unable to complete long distance calls.
Bill Dunn
----- Original Message ----- From: <alex@wanex.ge> To: "Discussion relating to the 3Com/US Robotics Total Control modem systems." <usr-tc@mailman.xmission.com> Sent: Monday, April 14, 2003 10:05 AM Subject: Re: [USR-TC] fast busies
From our side everything is the same (config etc.). This E1-s was working fine for a long time. We didn't changed/added any. Failure reason is timerExpired. Some calls pass but some doesnt. Can it be problem of TC? or maybe TELCO? Is it possible this problem to accure on every DSPs at one time(software or hardware)?
Todd Bertolozzi wrote:
Is this a new dialin circuit that was recently added to your huntgroup? Do you have any more details regarding it?
Maybe the telco didn't add the circuit to your huntgroup properly assuming all your config settings are setup correctly.
Todd
-----Original Message----- From: usr-tc-bounces@mailman.xmission.com [mailto:usr-tc-bounces@mailman.xmission.com]On Behalf Of alex@wanex.ge Sent: Monday, April 14, 2003 10:39 AM To: Discussion relating to the 3Com/US Robotics Total Control modem systems. Subject: Re: [USR-TC] fast busies
Sometimes DSP doesn't receive Called party number. I thing it happens when I get fast busies. Config is the same as it was early (when everything was OK). What can be reason?
alex@wanex.ge wrote:
One or two days ago I started getting fust busies on one of our TCs. Everything seems to be ok - timeslots are idle or connected and modems are ok (Admin/Oper statur = Up/Up). What can be reason of this fust busies?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc