Hi Jon,
Does anyone know of a way (pref. via SNMP) to disconnect a session? We have a NETServer card (as opposed to an edgeserver). The chasis has mostly quadmodems, but also two HiPer cards (umm.. those thingys that take a chan. T1 directly, and have the 24 modems on 'em DSP? Arc? don't know what you call those things, a bit new to thile whole TC rack thing).
The easiest way is to bring up the chassis in TCM. click only on the modem you want to place back on hook. It will turn blue. Click on the tool bar item called "Configure" then select "Action/Commands" then select "On Hook" in the "Command to Execute" pull down. Click the Execute button to send the command. You will see the modem hang up.
Also, for some strange reason, I can only talk to the NETServer card. The NMC card works for about a day or two, then will not respond to the console port, or network. Yet the rack continues to function correctly (take calls, do radius requests, etc..) An answer to this would be nice too..
I had this problem early on when I was running versions of firmware on various cards that did not exactly like each other. Some versions were buggy too. I'm running 3.8.77 and 3.7.24 in my netservers. What version are you running? Cheers, -Tom H.