What's your config look like for the dialout? It should look something like this: add modem_group <group name> interface Slot:#/mod:# <Enter> add network service <network service name> service telnetd socket 6002 data service_type=dialout,auth=off,modem_group=·type the modem group name· <Enter> list network services <Enter> *** Make sure the service is enabled list users <Enter> *** Verify that "default" user is enabled Telnet into the HiPer ARC port you specified. (e.g. telnet 10.10.10.52 tcp_port 6002) After connecting, type AT and then press enter. The modem should respond with OK which indicates that you have made a successful connection to a modem. Todd ----- Original Message ----- From: "Dev" <dev@umpa-us.com> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, January 21, 2004 10:44 AM Subject: [USR-TC] Dial-out/In help
Hello all,
I just got a T1 installed and plugged into the T1/E1 DSP card. I have a Green carrier light and no error lights. I want to test the T1 by dialing out to my cell phone and well it is not working. I have a user setup as a dial out user. I telnet into the hyperarc as that user and it just drops... no dialing at all?
I have been using the HARM via the TCM to do my configuring.
Any clues anyone?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc