Hi, Thanks for the info, but I'm afraid it isn't enough. I've set IPX on the interface and can see the IPX services on my network from the HiperARC. But when I dial-in, I don't see any Novell servers. I also didn't understand the part with setting the ipx network number to 255.255.255.254. If you have any further information or can point me to any documentation, I'd appreciate it. Thanks! On 7 Aug 2002 at 19:39, V wrote:
So you want to dial into the TC 1000 and make IPX available for that user? If so, then thats easy, you need to setup an IPX starting pool address, setup the user 'default' to IPX network number of 255.255.255.254 and also configure the IPX network on the ethernet interface.
-V ----- Original Message ----- From: "Wayne Barber" <barberw@tidewater.net> To: <usr-tc@mailman.xmission.com> Sent: Wednesday, August 07, 2002 1:13 PM Subject: [USR-TC] Dialup and IPX to Novell server
Hi all, I'm trying to setup dialup via TC1000 to an internal Novell server that uses IPX. I've looked at the manuals and cannot find much about how to set it up. Has anyone done this and can you give me some pointers?
Thanks, Wayne Barber Coastal Telco Services
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
Wayne Barber Coastal Telco Services