Quoting Brian <signal@shreve.net>:
disable user adm
You cannot delete the adm user. You can however disable it. At least this is the case with the versions I work off of.
Depends on the version of HiPer arc code. 4.1.59 above you can delete the user adm.
Brian
On Mon, 17 Jul 2000, Scot Desort wrote:
I am trying to accomplish 2 tasks:
1 - Change password in HARC for the user 'adm' in NVRAM. When I use the CLI, the command 'set user adm password xxxx' takes, I do a save all, and the old password is still active. If I try to use HARM, I get a message stating "cannot edit a user with type MANAGE"
For harm to work you must also enable snmp options on the hiper arc. Make sure that your system using Harm is allowed in the snmp configuration with read/write permissions.
-V
2 - I need to delete a different user in NVRAM that is also type MANAGE. Cannot seem to do that - same message as above referring to a user with type MANAGE.
Any thoughts?
-- Scot
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
----------------------------------------------------- Brian Feeny, CCNA signal@shreve.net 318-222-2638 x 109 http://www.shreve.net/~signal Network Administrator ShreveNet Inc. (ASN 11881)
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.
- To unsubscribe to usr-tc, send an email to "majordomo@xmission.com" with "unsubscribe usr-tc" in the body of the message. For information on digests or retrieving files and old messages send "help" to the same address. Do not use quotes in your message.