Hi, CommWorks told us it was "technically" possible to have manual speed and duplex feature on the hiperarc. One price I heard is $60 K to it. I understand 10 Mbps Full may not make sense from a 10/100 infrastructure perpective but for us, it makes a lot of sense. Another potential problem is if the hiperarc can't support 10 Mbps Full even when it is manually set. Richard Roy
From: "David A. Allen" <network-lists@gwi.net> Reply-To: usr-tc@mailman.xmission.com To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] 10 Mbps half duplex Date: Wed, 30 Oct 2002 10:00:05 -0500 (EST)
Cc: Commworks, Solunet
Richard,
We are dealing with a similar issue. We're using an HP switch, 10/100. We would like to hard-code to 100FDx, for the obvious reason that auto-detect is almost completely unreliable. Commworks repeated that dialogue verbatim.
"We will need you to pay for it as you are the only customer requesting this."
I find it rather interesting that we were told that a Cisco Catalyst (or most any switch other than HP) would not exhibit the auto-negotiation problems.
I will, however, give credit to Commworks for recognizing the issue after a time. They have, in fact, agreed to "determine what needs to happen to put manual overrides in place" without compensation. Beyond this they will not guarantee that the efforts they put forth towards resolving the issue are free of charge.
If you (or anyone for that matter) are interested in the ongoing progress of this issue, please contact me privately.
David A. Allen Manager, Network Department Great Works Internet
On Wed, 30 Oct 2002, Richard Roy wrote:
I would like to find a way to configure a port to 10 Mbps Full Duplex on hiperarc. I have a switch (Cisco Catalyst) that is capable of doing 10 Mbps half/full. It will be too costly to replace all my cards to support 10/100. When I set the switch port to 10 Mbps Full, the hiperarc default to 10 Mbps half because of autosensing logic. This create alignment errors...
So far, I am using up to 7 DSP per 10 Mbps half duplex connection. I see up to 4% collision rate. I am trying to get a better "Internet experience" out of my testing.
It will be "really" nice to have a manual speed & duplex setting. Because we use this interface like a "trunk", even at 100 Mbps autosensing I will prefer to see a manual setting.
I spoke to CommWorks and they want my company to pay for it because I'm the only customer requesting it.
In a nutshell, I would like to hear from you the following: - Is there a way to assign 10 Mbps full duplex if the switch is only 10 Mbps half/full? - If you are using a 10 Mbps half duplex, what is your maximum number of hiperDSP assigned to this conection? - Would you consider "important" to have a manual speed and duplex setting on hiperarc?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_________________________________________________________________ Surf the Web without missing calls! Get MSN Broadband. http://resourcecenter.msn.com/access/plans/freeactivation.asp