Thanks - but that doesn't work if HARM doesn't work - which if I remember correctly it doesn't with the newest code on the ARC. -----Original Message----- From: Kalev Nurklik [mailto:kalev@oserv.online.ee] Sent: Friday, January 31, 2003 1:37 AM To: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] Hiper ARC Question
From TCM You can invoke HARM and configure the IP. It's in the TCM menu somewhere.
Subject: RE: [USR-TC] Hiper ARC Question From: "Joel - Fox Computers" <jfox@foxcomputers.com> To: <usr-tc@mailman.xmission.com> Send reply to: usr-tc@mailman.xmission.com <mailto:usr-tc-request@mailman.xmission.com?subject=subscribe> <mailto:usr-tc-request@mailman.xmission.com?subject=unsubscribe> Date sent: Thu, 30 Jan 2003 21:35:40 -0600
yep - no way to blow out the ARC without being there, unless you have a modem cabled to the console port.
I thought maybe I could blow it out and then use TCM to set an IP address on the ARC - the options are there, but don't seem to do anything.
Oh well - experiment failed.
-----Original Message----- From: matthew@the-spa.com [mailto:matthew@the-spa.com] Sent: Thursday, January 30, 2003 9:14 PM To: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] Hiper ARC Question
probably not the easiest option but i would have a pc there with pc anywhere and a serial cable connection between them.
matthew
---- Original Message ---- From: jfox@foxcomputers.com To: usr-tc@mailman.xmission.com Subject: RE: [USR-TC] Hiper ARC Question Date: Thu, 30 Jan 2003 19:42:51 -0600
yes, but since the IP address is part of the config, I'm guessing that it will blow that out and I'll lose access to it. But what the heck - I'm going to give it a try.
-----Original Message----- From: Jim McCay [mailto:jmccay@adsnet.com] Sent: Thursday, January 30, 2003 7:06 PM To: usr-tc@mailman.xmission.com Subject: Re: [USR-TC] Hiper ARC Question
I'm new to the hiper arc's but won't the delete config command work?
jim
Joel - Fox Computers wrote:
For those of you familiar with the Hiper ARC's -
Is there any way you know of to completely erase the configuration from a telnet prompt? I want to do the equivelant of choosing option 13 from the bootup menu except I want to be able to do from Telnet - I want to be able to do a complete reconfig of a HiperARC remotely. Any suggestions?
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc
_______________________________________________ USR-TC mailing list USR-TC@mailman.xmission.com http://mailman.xmission.com/cgi-bin/mailman/listinfo/usr-tc